English

Master n+ ENSMM Mechatronics, Fabrication, Materials, Mechanical


Official Title
DIPLOME D'INGENIEUR ENSMM

Institute website
http://www.ens2m.fr
Program

Prerequisite of the training
Bachelor (minimum)

Formation type
Initial education

Course languageOnly french
Language level prerequisitesThe minimum language level required, namely : B1 in french et B1 in english will be verified no later than April 1st, 2018 RECENT OFFICIAL CERTIFICATION OF LEVEL IN FRENCH (DELF B1-B2) POSSIBLE INTERVIEW BY ENSMM'S MEMBERS

Language requirement to graduateFrench B2
English B2


ANGLAIS : TOEIC ou BULATS FRANCAIS : PROFESSEUR DE FLE

The M1 section is taught by
The institute : ENSMM

The M2 section is taught by
The institute : ENSMM

Domains
Mechatronics, Fabrication, Materials, Mechanical
Section M1

Location
ENSMM
26, chemin de l'Epitaphe

Average academic cost found without insurance of M1
970 euros

Description M1
M1 corresponds to general courses where the student acquires the necessary tools of an engineer in mechanics and microtechnologies. The student chooses between two specialities: 1) Product Engineering 2) Systems engineering

Scholarships M1
Scholarships given by the Grand Besançon are possible (300 euros monthly for one year)


Period 1
September - January Language Hours* Credits*
or
Core
PIM Program fr 260.00 30.00

French For Foreigners (50h, 5 ECTS) / Analysis of the scientific lectures and preparation to academic work in University (40h, 4 ECTS) / Mathematics (30h, 3 ECTS) / Mechanics of mechanisms (20h, 2ECTS) / Continuum mechanics (20h, 2 ECTS) / Material science (30h, 3 ECTS) / Production (40h, 4 ECTS) / Mechanical design (30h, 3 ECTS) / Project in FEMTO-ST or ENSMM (1 month,4 ECTS)

Note: a part of (or all) the M1-Period 1 will be replaced by a "n+i" special package designed for foreign student.
See the Methodology Integration Package (PIM) for more informations.
Period 2
February - June Language Hours* Credits*
or
Core
Foreign Languages (LV3) fr 60.00 3.00

Mandatory for all students: English
Mandatory for international students: French For Foreigners
Elective: German, Spanish, Japanese

Ergonomics (SHS3) fr 30.00 2.00

Elective courses, choose 8 in "Engineering of Systems"
Materials science (SDM2) fr 16.00 1.00

Physical properties of materials / Choice of materials for engineering applications (lect: 12/tut: 0/lab: 4)

Optics (OPT3) fr 15.00 1.00

Laser and engineering applications (welding, cutting, printing, etc.)
(lect: 7/tut: 4/lab: 4)

Mathematices (MATH4) fr 46.00 3.00

Resolution of linear/non linear algebraic/differential systems of equations (lect: 14/tut: 32/lab: 0)

Computer Science (INFO2) fr 30.00 2.00

Object-oriented programming and project (lect: 8/tut: 0/lab: 22)

Design (CM3) fr 60.00 4.00

Design of electro-mechanical product: from demand analysis to CAD model.
(lect: 0/tut: 60/lab: 0)

Automation (AUT2) fr 90.00 6.00

Advanced automation / command with micro-controller / optimization of systems (lect: 22/tut: 16/lab: 52)

Fabrication (FAB2) fr 100.00 4.00

Manufacturing, metrology and quality (lect: 38/tut: 26/lab: 32)

Microtechnology (µTECH1) fr 20.00 2.00

Introduction to microtechnologies / Clean room (lect: 8/tut: 4/lab: 8)

Elective courses, choose 8 in "Engineering of Products"
Materials science (SDM3) fr 46.00 3.00

Physical properties of materials / Choice of materials for engineering applications (lect: 16/tut: 14/lab: 16)

Optics (OPT2) fr 15.00 1.00

Laser and application for instrumentation and metrology (lect: 7/tut: 4/lab: 4)

Mathematics (MATH3) fr 46.00 3.00

Resolution of linear/non linear algebraic/differential systems of equations (lect: 4/tut: 42/lab: 0)

Design (CM2) fr 60.00 4.00

Design of electro-mechanical product: from demand analysis to CAD model.
(lect: 0/tut: 60/lab: 0)

Electronics (ELEC2) fr 70.00 4.00

Conversion of energy / Dimensionning of motors / Conditionning electrical signals (lect: 12/tut: 42/lab: 16)

Microtechnology (µTECH2) fr 20.00 2.00

Introduction to microtechnolies / Clean room (lect: 8/tut: 4/lab: 8)

Structural mechanics (CDS) fr 60.00 4.00

Linear Finite Element Method / Continuum mechanics and variationnal method / Approximation and discretization / Solid, plate, beam and trust finite element and their formulation / Resolution and numerical methods / Buckling / Isotropic and anisotropic elasticity (lect: 4/tut: 32/lab: 24)

Structural dynamics (DYN2) fr 60.00 4.00

Natural frequency, free and forced responses / Hamilton method for mouvement equation / Kinematic hypothesis for beam vibrations / Longitudinal, transversal vibrations of beam / Analytics of a vibration problem / Numerical analysis (Ritz, EF) (lect: 14/tut: 26/lab: 20)


* The number of course hours may be subjected to slight variations.
* More informations about ECTS credits.
Section M2

Location
ENSMM
26, chemin de l'Epitaphe

Average academic cost found without insurance of M2
770 euros

Description M2
In the first semester, the student has to choose one of the four specialties in relation of their M1 program.
The second semester is devoted to the final project work (internship), of 6 months, in a company. In France, a gratification of about 550 euros has to be paid to sudents doing an internship.

Scholarships M2
none


Period 1
September - January Language Hours* Credits*
or
Core
Economy - Management - Communication fr 56.00 3.00

Foreign languages fr 56.00 3.00

Mandatory: English / Mandatory for international students: French For Foreigners / Other languages: German, Spanish, Japanese

Project Work fr 56.00 4.00

Elective courses, choose 1 in "Speciality"
Advanced Mechanics fr 240.00 16.00

Advanced dynamics / Non linear mechanichs and rapid dynamics / Mechanics of materials / Numerical methods for optimization, identification, sensitivity analysis and robust development

Functionalization of Materials and Surfaces fr 240.00 16.00

Advanced materials / Analysis of surfaces and interfaces in materials / Tribology and bonding / Corrsosion and surface protection

Design and Realization of Connected Products fr 240.00 16.00

Functional, aesthetic and ergonomic design of connected products / Composants of connected products / Control and networks / Big data and cloud computing

Instrumentation in microtechnique fr 240.00 16.00

Advanced microsystems for health / Optics in biomedical technology and in nano-biotechnology / Materials and mechanics for biomedical applications

Micro Mechanics fr 240.00 16.00

Design of micromechanical systems / Mechnics of materials / Numerical engineering in micromechanics / Micromanufacturing

Engineering of Production Systems fr 240.00 16.00

Organization and control of production systems / Operational research / Prognostics and Health Management (PHM), Maintenance / Modelling and evaluation of industrial systems / Continuous improvement

Industrialization Methods fr 240.00 16.00

Optimization of manufacturing processes / Machines and tools design / Quality and industrialization / Micromanufacturing

Mechatronics and Robotics fr 240.00 16.00

Architecture of mechatronics systems / Robotics and vision / Modelling and identification / Advanced automation

Period 2
February - June Language Hours* Credits*
or
Core
Final Industrial Project fr 450.00 30.00


* The number of course hours may be subjected to slight variations.
* More informations about ECTS credits.